Can glass polyalkenoate (glass-ionomer) dental cements be considered bioactive? A review.

Objectives: This paper reviews the chemical behaviour of glass polyalkenoate (glass-ionomer) dental cements, both conventional and resin-modified, in contact with natural tissues, with the aim of determining whether these materials can be considered to be bioactive. Data: Relevant papers describing the behaviour of bioactive glasses and ceramics, and glass-ionomer (glass polyalkenoate) cements have been identified using PubMed and Science Direct. This has allowed a comparison to be made between the behaviour of glass-ionomers and the speciality glasses and ceramics that are widely classified as bioactive, a designation considered valid for over fifty years. More recent papers concerning bioactive metals and polymers have also been studied and both in vitro and in vivo studies are included. Sources: Have included general papers on the chemistry and biological behaviour of bioactive glasses and ceramics, as well as papers on glass-ionomers dealing with (i) ion release, (ii) bonding to the surface of teeth, (iii) influence on surrounding pH and (iv) interaction with bone. Conclusion: The literature shows that glass-ionomers (glass polyalkenoates) have three types of behaviour that are similar to those of bioactive glasses as follows: Formation of direct bonds to living tissue (teeth and bones) without fibrous capsule; release of biologically beneficial ions; and change of the local pH. However, in in vitro tests, they do not cause calcium phosphate to precipitate from solutions of simulated body fluid, SBF. Despite this, studies show that, in patients, glass-ionomers interact chemically with hard tissues and this suggests that may indeed be considered bioactive.

Fluoride exchange by glass-ionomer dental cements and its clinical effects: a review.

The topic of fluoride release and uptake by glass-ionomer (glass polyalkenoate) dental cements is reviewed. The study was based on a literature search carried out using PubMed. The main key words used were glass-ionomer and fluoride, and further refinements were made by adding the keywords anti-microbial, anti-caries and remineralization. Papers were selected from the initial search, which concentrated on fundamental aspects of fluoride release, including kinetics and the influence of the cement composition, and resulting clinical performance against caries. Other relevant papers were cited where they added useful and relevant data. From these published papers, it was possible to explain the detailed mechanism of fluoride release by glass-ionomer cements and also its uptake. Fluoride release has been shown to be a two-step process. In neutral solutions, the steps can be divided into early wash-out and long-term diffusion. In acid conditions, the early wash-out remains, though with greater amounts of fluoride released, and the long-term release becomes one of slow dissolution. The effect of fluoride on the viability of oral micro-organisms has been described, and glass-ionomers have been shown to release sufficient fluoride to reduce the size and viability of adjacent populations of oral bacteria. The effect of low levels of fluoride on the remineralization of tooth tissue has been considered. Levels needed to increase remineralization are much lower than those needed to adversely affect oral bacteria, from which we conclude that glass-ionomers release sufficient fluoride to promote remineralization. Despite this, there remains uncertainty about their overall contribution to sound oral health, given the widespread use of other sources of fluoride, such as toothpastes.

Biological Evaluation of Zinc Phosphate Cement for Potential Bone Contact Applications.

Zinc phosphate cement is used in dentistry to lute crowns and bridges. So far, its biocompatibility for other applications has not been studied. This paper reports the biocompatibility of zinc phosphate towards MG63 cells, testing both the material (discs; 3 mm diameter × 1 mm thick) and leachate from the cement. Cell viability was determined using an MTT assay, and cytotoxicity from the effects of leachate, studied in triplicate. Microscopy (optical and scanning electron) determined the morphology and proliferation of cells attached to zinc phosphate. ICP-OES measured element release into leachate, and anti-microbial behaviour was determined against Streptococcus pyrogenes cultured on a Brain Heart Infusion agar using cement discs (3 mm diameter × 1 mm thick). Zones of inhibition were measured after 72 h. MG63 cells proliferated on zinc phosphate surfaces and retained their morphology. The cells were healthy and viable as shown by an MTT assay, both on cement and in leachate. High levels of phosphorus but low levels of zinc were released into leachate. The cement showed minimal antimicrobial activity against S. pyogenes, probably due to the long maturation times used. Zinc phosphate cement was found to be biocompatible towards MG63 cells, which indicates that it may be capable of use in bone contact applications.

Allosteric rescue of catalytically impaired ATP phosphoribosyltransferase variants links protein dynamics to active-site electrostatic preorganisation.

ATP phosphoribosyltransferase catalyses the first step of histidine biosynthesis and is controlled via a complex allosteric mechanism where the regulatory protein HisZ enhances catalysis by the catalytic protein HisGS while mediating allosteric inhibition by histidine. Activation by HisZ was proposed to position HisGS Arg56 to stabilise departure of the pyrophosphate leaving group. Here we report active-site mutants of HisGS with impaired reaction chemistry which can be allosterically restored by HisZ despite the HisZ:HisGS interface lying ~20 Å away from the active site. MD simulations indicate HisZ binding constrains the dynamics of HisGS to favour a preorganised active site where both Arg56 and Arg32 are poised to stabilise leaving-group departure in WT-HisGS. In the Arg56Ala-HisGS mutant, HisZ modulates Arg32 dynamics so that it can partially compensate for the absence of Arg56. These results illustrate how remote protein-protein interactions translate into catalytic resilience by restoring damaged electrostatic preorganisation at the active site.

Computed tomography-based body composition measures in COPD and their association with clinical outcomes: A systematic review.

BACKGROUND: Computed tomography (CT) is commonly utilized in chronic obstructive pulmonary disease (COPD) for lung cancer screening and emphysema characterization. Computed tomography-morphometric analysis of body composition (muscle mass and adiposity) has gained increased recognition as a marker of disease severity and prognosis. This systematic review aimed to describe the CT-methodology used to assess body composition and identify the association of body composition measures and disease severity, health-related quality of life (HRQL), cardiometabolic risk factors, respiratory exacerbations, and survival in patients with COPD. METHODS: Six databases were searched (inception-September 2021) for studies evaluating adult COPD patients using thoracic or abdominal CT-muscle or adiposity body composition measures. The systematic review was conducted in accordance with the PRISMA guidelines. RESULTS: Twenty eight articles were included with 15,431 COPD patients, across all GOLD stages with 77% males, age range (mean/median 59-78 years), and BMI range 19.8-29.3 kg/m2. There was heterogeneity in assessment of muscle mass and adiposity using thoracic (n = 22) and abdominal (n = 8) CT-scans, capturing different muscle groups, anatomic locations, and adiposity compartments (visceral, subcutaneous, and epicardial). Low muscle mass and increased adiposity were associated with increased COPD severity measures (lung function, exercise capacity, dyspnea) and lower HRQL, but were not consistent across studies. Increased visceral adiposity (n = 6) was associated with cardiovascular disease or risk factors (hypertension, hyperlipidemia, and diabetes). Low muscle CSA was prognostic of respiratory exacerbations or mortality in three of six studies, whereas the relationship with increased intermuscular adiposity and greater mortality was only observed in one of three studies. CONCLUSION: There was significant variability in CT-body composition measures. In several studies, low muscle mass was associated with increased disease severity and lower HRQL, whereas adiposity with cardiovascular disease/risk factors. Given the heterogeneity in body composition measures and clinical outcomes, the prognostic utility of CT-body composition in COPD requires further study.

Long-Term Water Balance Evaluation in Glass Ionomer Restorative Materials.

The complex role of water in glass ionomer cement (polyalkenoate) dental restorative materials has been studied, but much of the present understanding concerning water balance within these materials is based on very early studies and short-term experiments. This study evaluated the nature of the water species of six conventional and four resin modified glass ionomer restorative materials over 3 years using thermogravimetric analysis techniques. Materials were prepared, placed in crucibles, and stored in physiologic phosphate buffered saline and evaluated at 24 h, 1 week, and then at 1, 3, 6, 9, 12, 18, 24, 30 and 36 months. All materials demonstrated a significant increase in unbound water percentage content but except for the resin modified materials, the enthalpy required to remove the unbound water species did not significantly change over 36 months. Also, bound water content percentage and removal enthalpy was established at 24 h, as no significant increase was noted in both bound water content and removal enthalpy over the course of this evaluation. This study suggests that unbound water species may increase with time and is loosely held except for the resin modified materials. Protective coatings placement and re-evaluation are prudent to prevent unbound water loss.

Allosteric Inhibition of Acinetobacter baumannii ATP Phosphoribosyltransferase by Protein:Dipeptide and Protein:Protein Interactions.

ATP phosphoribosyltransferase (ATPPRT) catalyzes the first step of histidine biosynthesis in bacteria, namely, the condensation of ATP and 5-phospho-α-d-ribosyl-1-pyrophosphate (PRPP) to generate N1-(5-phospho-ß-d-ribosyl)-ATP (PRATP) and pyrophosphate. Catalytic (HisGS) and regulatory (HisZ) subunits assemble in a hetero-octamer where HisZ activates HisGS and mediates allosteric inhibition by histidine. In Acinetobacter baumannnii, HisGS is necessary for the bacterium to persist in the lung during pneumonia. Inhibition of ATPPRT is thus a promising strategy for specific antibiotic development. Here, A. baumannii ATPPRT is shown to follow a rapid equilibrium random kinetic mechanism, unlike any other ATPPRT. Histidine noncompetitively inhibits ATPPRT. Binding kinetics indicates histidine binds to free ATPPRT and to ATPPRT:PRPP and ATPPRT:ATP binary complexes with similar affinity following a two-step binding mechanism, but with distinct kinetic partition of the initial enzyme:inhibitor complex. The dipeptide histidine-proline inhibits ATPPRT competitively and likely uncompetitively, respectively, against PRPP and ATP. Rapid kinetics analysis shows His-Pro binds to the ATPPRT:ATP complex via a two-step binding mechanism. A related HisZ that shares 43% sequence identity with A. baumannii HisZ is a tight-binding allosteric inhibitor of A. baumannii HisGS. These findings lay the foundation for inhibitor design against A. baumannii ATPPRT.

Determination of chemical species of fluoride during uptake mechanism of glass-ionomer cements with NMR spectroscopy.

OBJECTIVE: The aim of the present study was to determine the chemical species formed inside glass-ionomer cements after fluoride uptake and to investigate the depth of penetration of fluoride ions within the cement matrix. METHODS: An experimental fluoride-free glass with composition 2SiO2-AlO3-CaO was produced. The glass powder was mixed with aqueous poly(acrylic acid) (PAA), and allowed to set. The resulting specimens were stored in 20ml KF solution with 1000ppm fluorine for 24h and then placed into the same amount of water as for 24h. A fluoride selective electrode was used to give the F concentration of the respective solutions. 19F MAS-NMR spectra were recorded on powdered cement specimens using a Bruker AVANCE-NEO 600 spectrometer. In addition, SEM observation and EDX chemical analysis were conducted on the cross-section of a carefully fractured specimen. RESULTS: Fluoride was shown to be mainly present in the surface layers of the specimen after placement in the KF solution, and only a small fraction was re-released into water. 19F NMR spectroscopy showed that AlF complexes were formed within the cement. SIGNIFICANCE: The fluoride taken up by a free-fluoride glass ionomer cement mostly occupies surface layers and is retained because it bonds to aluminum within the matrix. This finding explains why the majority of fluoride taken up by conventional glass ionomer cements is retained.

Studies of the early stages of the dynamic setting process of chemically activated restorative glass-ionomer cements.

OBJECTIVE: To evaluate the early stages of the setting process of chemically activated restorative glass-ionomer cements (GICs). MATERIAL AND METHODS: Five GICs were evaluated (n = 5): Equia Forte (GC), Equia Forte HT (GC), Ketac Universal (3M ESPE), Maxxion R (FGM) and Riva Self Cure (SDI) by Thermography, Fourier Transform Infrared Attenuated Total Reflectance Spectroscopy (FTIR-ATR) and Gillmore needle indentation mechanical testing. The FTIR-ATR spectra showed the formation of metal carboxylates within the cements and enabled the stabilization time (ST) to be determined and the thermographic camera measured the temperature field images in the sample. Data were statistically analyzed by ANOVA and Tukey-Kramer (α = 5%). RESULTS: The Gillmore needle test showed that the order of hardening was opposite to the order of ST values determined by FTIR. The results with the thermographic camera showed two stages of temperature variation, which coincided with the evolution of specific infrared bands. The exception was Maxxion R, which showed only a single step change in temperature. CONCLUSION: The early stages of the GIC setting reaction show temperature changes, both endothermic and exothermic, at specific times, confirming the occurrence of individual chemical reactions. The early setting involves reactions other than carboxylate formation.Significance: This study gives further detail of the early stages of the setting of GICs, and past research regarding the setting reaction of GIC.

Kinetics of ion release from a conventional glass-ionomer cement.

Release kinetics for sodium, silicon, aluminium, calcium and phosphorus from conventional glass-ionomer dental cement has been studied in neutral and acid conditions. Specimens (6 mm height × 4 mm diameter) were made from AquaCem (Dentsply, Konstanz, Germany), 6 per experiment. They were matured (37 °C, 1 h), then placed in 5 cm3 storage solution at 20-22 °C. In the first experiment, deionised water, changed daily for 28 days, was used. In the second, deionised water, changed monthly for 21 months, was used. In the third, lactic acid (20 mmol dm-3, pH: 2.7 ± 0.1), changed monthly for 21 months was used. After storage each solution was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Results showed that in neutral conditions, no calcium was released, but in acid, significant amounts were released. The other elements (Na, Al, Si and P) were released in neutral as well as acid conditions, with greater amounts in acid. More frequent changes of water gave greater release. In neutral conditions, release over 21 months followed the equation: [E]c = [E]1t/(t + t½) + ß√t ([E]c is the cumulative release of the element). In acid conditions, this became: [E]c = [E]1t/(t + t½) + αt. Hence release of all elements was shown to occur in two steps, a rapid initial one (half-life: 12-18 h) and a longer second one. In neutral conditions, the longer step involves diffusion; in acid it involves erosion. These patterns influence the material's bioactivity.

Consensus on glass-ionomer cement thresholds for restorative indications.

OBJECTIVE: The aim of this paper is to present the results of a consensus meeting on the threshold property requirements for the clinical use of conventional glass-ionomer cements (GICs) for restorative indications. METHODS: Twenty-one experts on GICs evaluated the results of tests on mechanical and optical properties of 18 different brands of restorative GICs: Bioglass R [B], Chemfil Rock [CR], Equia Forte [EF], Gold Label 2 [GL2], Gold Label 9 [GL9], Glass Ionomer Cement II [GI], Ionglass [IG], Ion Z [IZ], Ionomaster [IM], Ionofil Plus [IP], Ionostar Plus [IS], Ketac Molar Easymix [KM], Magic Glass [MG], Maxxion R [MA], Riva Self Cure [R], Vidrion R [V], Vitro Fil [VF] and Vitro Molar [VM]. All experiments were carried out by a team of researchers from Brazil and England following strict protocols, under the same laboratory conditions throughout, and maintaining data integrity. RESULTS: There was consensus on: determining as primary properties of the material: compressive strength, microhardness, acid erosion and fluoride release, and as secondary properties: contrast ratio and translucency parameter, in order to rank the materials. Seven brands were below the thresholds for restorative indications: IZ, IM, IG, MA, VF, B and MG. CONCLUSIONS: Based on the primary properties adopted as being essential for restorative indications, the conventional restorative GICs that met the thresholds and could be considered suitable as long-term restorative materials were: EF, GI, GL9, KM, IP, GL2, IS, CR, V, VM and R. A decision-making process to select the best GIC must also include results from clinical trials. CLINICAL SIGNIFICANCE: This study provides a ranking of GICs that could be considered suitable as long-term restorative materials based on their main properties.

Legged locomotion in resistive terrains.

The utility, efficiency, and reliability of legged robots has increased dramatically in recent years. Limbed robots are now capable of locomotion across a variety of terrains, however, achieving both rapid and efficient operation when ground conditions are complex or deformable is still challenging. Resistive terrains such as streams, snow, mud, littoral regions, and tall grass are an important class or set of complex and difficult terrain which are commonly found in the desired operating environments of legged robots. This work presents a reduced-order, dynamic model designed to capture the effect of these environments on the legs of a robot while running. This model, and an experimental platform, are used to evaluate the efficacy of a pair of strategies for adapting running to the inevitable slowing that occurs in resistive terrains. Simulation and experimental results show that intelligent retraction of the foot during flight has a more beneficial effect on the maximum achievable velocity and cost of transport of the runner than a 'punting gait' for a range of fluid depths. However, this performance gap became much smaller in deep fluids suggesting that fluid depth may drive transition from a foot retraction gait to a punting gait.

Translucency parameter of conventional restorative glass-ionomer cements.

OBJECTIVE: To evaluate the translucency parameter (TP) and contrast ratio (CR) of different conventional restorative glass-ionomer cements (GICs). MATERIALS AND METHODS: Eighteen brands of GICs were evaluated. Five disks of each material were made following ISO 9917-1. The luminous reflectance and Central Bureau of the International Commission on Illumination parameters of disks were evaluated using a colorimeter, against backings of white and black, to obtain the translucent parameter and contrast ratio of different brands of glass-ionomer cements. The correlation between translucency parameter and contrast ratio was assessed with the Pearson correlation test. The translucent and contrast ratio parameters values were submitted to the one-way ANOVA and Tukey test for multiple comparisons (p < 0.05). RESULTS: There was a strong inverse relationship between CR and TP (r2  = 0.94, p < 0.001). The contrast ratio decreased as translucency increased. There were significant differences in TP and CR among brands (p < 0.001). CONLUSIONS: GICs exhibit different translucency and contrast ratio behavior. Some brands of GICs presented very low TP and this condition would be unacceptable for areas with esthetic demands. In addition, TP and CR showed a strong linear relationship. CLINICAL SIGNIFICANCE: The results found in this study demonstrated that the knowledge of the translucency and CR of different conventional restorative GICs is important in order to guide clinicians in the selection of restorative GICs for anterior teeth.

Clinical outcomes associated with computed tomography-based body composition measures in lung transplantation: a systematic review.

Computed tomography (CT) is gaining increased recognition in the assessment of body composition in lung transplant (LTx) candidates as a prognostic marker of post-transplant outcomes. This systematic review was conducted to describe the methodology of CT measures of body composition used in LTx patients and its association with post-transplant outcomes. Six databases were searched (inception-April 2020) for studies of adult LTx patients with thoracic or abdominal CT measures [muscle cross-sectional area (CSA) and/or adiposity]. Thirteen articles were included with 1911 LTx candidates, 58% males, mean age range (48-61 years) and body mass index of 21.0-26.1 kg/m2 . Several methods were utilized using thoracic or abdominal CT scans to assess skeletal muscle (n = 11) and adiposity (n = 4) at various anatomic locations (carina, thoracic, and lumbar vertebrae), differing muscle groups, and adipose tissue compartments. Low muscle mass was associated with adverse outcomes in 6/11 studies, including longer mechanical ventilation days (n = 2), intensive care (n = 2) and hospital stay (n = 2), and mortality (n = 4). Greater subcutaneous and mediastinal fat were associated with increased risk of primary graft dysfunction (n = 2), but implications of adiposity on survival were variable across four studies. Further standardization of CT body composition assessments is needed to assess the prognostic utility of these measures on LTx outcomes.

"Turning Point": Evaluating the Impact of a Three-Month UK-Based Clinical Education Training Programme for Physicians from a Chinese Medical School.

PURPOSE: Transnational faculty development programmes are increasingly popular in medicine, although evaluation of such activities rarely consider longer-term outcomes or the impact of language training. This study attempts to fill this gap by evaluating the lasting impacts of a three-month clinical education and English language training programme at University College London Medical School, UK, for medical educators from Ningbo University, China. METHODS: In-depth, semi-structured interviews were conducted in China with 41 participants who had completed the programme between 2013 and 2018. Interview data were analysed using an inductive thematic analysis, and themes were categorised using the four primary components of the faculty development model outlined by Irby and O'Sullivan (2011) - context, facilitator, programme, and participant. RESULTS: Contextual impacts included the importance of participants learning in the familiar environment of their own clinical discipline, the cultural enrichment gained by spending time overseas, reflecting on differences in health-care systems, and attempts to implement and disseminate learning on return to China. Facilitator-related factors included new insights into the student-educator relationship and valuing the support of programme mentors. Programme-related factors included exposure to new teaching methods and technical presentation skills, the challenges of navigating observership placements, spoken English language and pronunciation issues, and establishing a peer network of medical educators. Participant-related factors included improved confidence and self-reflection, adjusting educational approaches for different student groups, and career development in medical education. CONCLUSION: Participants gained teaching confidence from their engagement in the programme and many described it as a turning point in their careers as educators. Although in the period after attending, individuals changed their own practices and influenced colleagues within their organisation, often through taking on senior roles, systematic education changes were generally not implemented. Dedicated English language classes and clinical placements were considered the most positive features of the programme.

"Doctor, teacher, translator:" International medical students' experiences of clinical teaching on an English language undergraduate medical course in China.

Background: Like many Chinese universities, Ningbo University (NBU) has two undergraduate medical courses - one taught in Mandarin for domestic students, and one taught in English for international students. This study examines the experiences of medical students who recently completed the English language program that has a particular focus on clinical placements. Methods: In-depth, face-to-face, semi-structured interviews were conducted with 10 final year medical students at NBU in April 2019. Transcripts were analyzed using inductive thematic analysis. Results: All medical student participants were non native English speakers and had a limited grasp of Chinese. Their clinical teachers were all fluent in Chinese and had variable command of English. The large majority of patients in the teaching hospitals where placements took place spoke only in Chinese. Despite the obvious challenges arising from this, students still had predominantly positive experiences of clinical placements. Although students recognized that their clinical teachers' English proficiency was variable, they felt that other attributes, such as enthusiasm, interactivity, and a desire to teach were more important factors to their learning experiences. Discussion: Despite challenging linguistic circumstances, non native English-speaking students were able to navigate the challenges of studying clinical medicine from teachers with limited English language skills and with patients who spoke virtually no English. Further studies should explore the perceptions of teachers of the program, and graduate outcomes when these students enter the workplace. Educators involved in supporting international medical students should note that non technical curricular areas such as professionalism may require greater attention where language barriers exist.

Correlation between mechanical properties and stabilization time of chemical bonds in glass-ionomer cements.

The objective was to evaluate the compressive strength (CS), diametral tensile strength (DTS), flexural strength (FS), and Knoop microhardness (KH) of different conventional restorative glass-ionomer cements (GICs) and to correlate these mechanical properties (MP) with the stabilization time (ST) of their chemical bonds. Eighteen GICs were tested: Bioglass [B], Chemfil Rock [CR], Equia Forte [EF], Gold Label 2 [GL2], Gold Label 9 [GL9], Glass Ionomer Cement II [GI], Ionglass [IG], Ion Z[ IZ], Ionomaster [IM], Ionofil Plus [IP], Ionostar Plus [IS], Ketac Molar Easymix [KM], Magic Glass [MG], Maxxion R [Ma], Riva Self Cure [R], Vidrion R [V], Vitro Fil [VF] and Vitro Molar [VM]. The mechanical strength tests were performed in a universal testing machine. KH readings were done with a diamond indenter. STs were examined by Fourier Transform Infrared spectroscopy (FTIR). Data were analyzed with ANOVA and Tukey test (p<0.05). The Spearman rank test was used to evaluate the dependence between the MPs and ST results. The highest MP values were EF, GL2, GL9, GI and KM and the lowest for MG, MA, B, VF and IM. The longest ST was for GL2 and the shortest was for B. ST correlated positively with MP. GICs with longer chemical bonds ST are generally stronger and the ST value obtained from FTIR was useful in predicting the strength of GICs tested.

Enhancing the Mechanical Properties of Glass-Ionomer Dental Cements: A Review.

This paper reviews the strategies that have been reported in the literature to attempt to reinforce glass-ionomer dental cements, both conventional and resin-modified. These cements are widely used in current clinical practice, but their use is limited to regions where loading is not high. Reinforcement might extend these applications, particularly to the posterior dentition. A variety of strategies have been identified, including the use of fibres, nanoparticles, and larger particle additives. One problem revealed by the literature survey is the limited extent to which researchers have used International Standard test methods. This makes comparison of results very difficult. However, it does seem possible to draw conclusions from this substantial body of work and these are (1) that powders with conventional particle sizes do not reinforce glass-ionomer cements, (2) certain fibres and certain nanoparticles give distinct improvements in strength, and (3) in the case of the nanoparticles these improvements are associated with differences in the morphology of the cement matrix, in particular, a reduction in the porosity. Despite these improvements, none of the developments has yet been translated into clinical use.